We have available with us a technically advanced range of Plano Miller which is manufactured using high grade raw material. Our range is fabricated in accordance with the specifications of our clients and is appreciated across the globe for outstanding performance and long serviceability.

Features of our range are as follows:

Compact Design

• Rigid double column
• Body bore system planer fitted with gun metal bushes

Proper Lubrication

• Automatic lubricating system with suitable forced pump provided to facilitate the lubrication of bearing surface
• Wiper fitting and oil filter trays fitted to keep the 'V' guides clean of oil, to avoid oil wastage and filtering of oil
• Provision for oiling the gears from outside provided

The Bed

• Bed is fabricated using high duty alloys grey casting having proper strength and long wearing qualities
• Deep box section and tied together at frequent intervals by double walled bridge pieces extended to the bottom of bed
• Two 'V' guides accurately hand scrapped up to extreme limits

The Table

• Box section with hand scrapped 'V' ways to bear heavy load
• Heavily ribbed and the spur milling cut Rack provided with non wearing quality for smooth running
• Adequate number of 'T' slots provided to clamp the work-piece precisely and securely

The Gearing

• Main bearings for gearings are cast solid with the bed and Hob Cut Gear Teeth
• Helical gears of finest quality material capable enough to stand increased cutting and quick return speed
• Gun metal bearings provided for all the shafts and Ball bearings for loose pulleys

The Cross Rail

• Box section heavily ribbed with large surface
• Suitable for both hand and automatic horizontal and vertical feeds

The Columns

• Uprights rigid box section firmly, bolted on the bed for precise alignment
• Capable of absorbing the heaviest shocks without vibration
• Location pins provided to help refit machine accurately after once it is dismantled
• Pillars specially designed for the permanent fitting of the side tool posts, which can be moved right up to the surface level on the guide- ways when not required for use.

These machines are an extension of plano miller and is used in different industries. Fabricated with quality raw materials, these plano millers are rugged and durable. Further, these specifications can also be customized as per the clients requirements.

Model	KF 2000	KF 2500	KF 3000	KF 4000	KF 5000	KF 6000	KF 7000	KF 8000
Length of Bed	3500	4400	5200	7000	8700	10500	12000	14000
Length of Table	2300	2800	3300	4300	5300	6300	7300	8300
Max. Travel of Table	2000	2500	3000	4000	5000	6000	7000	8000
Face of Column	350	350	350	350	400	425	475	475
Face of Cross Rail	500	500	500	500	600	600	700	700
Admit. Between Columns	1200	1200	1500	1500	1800	1800	2100	2100
Admit. Under Cross Rail	1200	1200	1500	1500	1500	1500	1800	1800
No. of Table Speeds	9	9	9	9	9	9	9	9
Table Feeds Per Minute	25 MM to 100 MM
Driving Unit of Table	Available in Rack & Gear Drive & Screw Type Drive
Main Drive Motor H.P.	7.5	7.5	10	10	15	20	25	30
Elevating Motor H.P.	2	2	2	2	3	3	5	5

Model	6' inch mm	8' inch mm	10' inch mm	12' inch mm	14' inch mm	16' inch mm	18' inch mm	20' inch mm	25' inch mm
Length of Bed	108 2700	144 3600	180 4572	216 5486	252 6400	288 7229	324 7915	360 9144	444 11277
Length of Table	84 2100	180 2700	132 3352	156 3885	180 4572	204 5180	228 5790	252 6400	312 7924
Max. Travel of Table	72 1800	96 2400	120 3048	144 3656	168 4267	192 4876	216 5486	240 6096	300 7620
Max height under cross rail	54 1350	54 1350	60 1524	60 1524	60 1524	60 1524	66 1676	72 1828	72 1828
Max. Planing width	54 1350	54 1350	60 1524	60 1524	60 1524	60 1524	72 1828	72 1828	84 2133
Tool post down feed	8 200	8 200	10 254	10 254	10 254	10 254	10 254	12 304	12 304
Cutting speed p.m.	420	420	420	420	420	420	420	384	384
Return speed p.m.	520	520	520	520	520	520	520	500	500
No of tool post on cross rail	1	1	2	2	2	2	2	2	2
H.P required	5	5	7.5	7.5	10	10	10	15	20